 |
 |
 |
|
Call for Pricing
The GrandPrix GP-9F is the perfect home car lift. Its slim, toughened boxed-steel columns are preferred by many for home lifting applications. Maintenance is minimal and easy to perform.
- Capacity
- Lifting Capacity*: 9,000 lbs. (4,082 kg)
- *Max Capacity / Front Axle: 4,500 lbs. (2,041 kg)
- *Max Capacity / Rear Axle: 4,500 lbs. (2,041 kg)
Rise
- Min. Runway Height: 5" (127 mm)
- Max. Rise: 72.5" (1,842 mm)
- Max. Lifting Height: 77.5" (1,969 mm)
- Time to Full Rise: 45 seconds
Outside Dimensions
- Overall Width: 113" (2,870 mm)
- Outside Length: 177" (4,496 mm)
- Overall Length: 210" (5,334 mm)
- Height of Columns: 93" (2,362 mm)
Inside Dimensions
- Width Between Columns: 98" (2,489 mm)
- Drive-Thru Clearance: 86" (2,184 mm)
Runways
- Runway Width: 19" (483 mm)
- Length of Runways: 165" (4,191 mm)
- Width Between Runways: 37.5" (953 mm)
- Runway Centerline: 56.5" (1,435 mm)
- Outside Edge of Runways: 75.5" (1,918 mm)
Minimum Wheelbase
- Rated Capacity: 115" (2,921 mm)
- 75% Capacity: 100" (2,540 mm)
- 50% Capacity: 85" (2,159 mm)
- 25% Capacity: 70" (1,778 mm)
Locking
- Locking Positions: 13
- Lock Spacing: Every 4” (102 mm)
Power Unit
- Motor: 110-VAC / 50-60 Hz / 1 Ph / 20-amp
- Noise: 45 dB
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- BendPak’s proven legacy gives you an edge in performance, service and cost of ownership.
- Designed to be fastened to the floor or free-standing.
- Comes standard with caster kit, drip trays, mobile jack tray, aluminum approach ramps, hardened steel tire stops and hard rubber wheel chocks.
- Boxed-steel columns are made from structural 4.75” x 4.75" welded steel tubing.
- Columns feature 12” x 12” baseplates 5/8” thick.
- Manual dead bolt locks are reliable and safe and are machined directly into the boxed-steel columns.
- 3/4" thick steel safety locks are spring loaded for automatic and solid engagement.
- 13 positive locking positions are spaced every 4 inches.
- Secondary slack-cable lock system assures instant back-up safety lock engagement in the event of a cable failure.
- Exterior steel sleeves with UHMV slides surround each column to ensure positive contact and containment.
- ¾” thick safety locks are securely trapped by the full-perimeter cross tube sleeves and can't become dislodged or disengaged.
- Welded-steel runways feature utility rail for jack tray and drip trays and other accessories.
- Runways are welded and boxed for extra strength.
- Built-in flow restriction integrated into the hydraulic cylinder to prevent free-fall.
- Oversize baseplates and pull-perimeter cross tube sleeves reduce lateral movement and sway when lift is free-standing.
- Low-profile runways are only 5" high to accommodate low ride-height vehicles.
- Hardened steel safety lock linkages use 3/8” molded carbon steel rod ends to reduce flex and twist to ensure positive locking and smooth operation.
- Precision, reinforced rod ends with spherical bearings are protective coated for corrosion resistance and are designed to provide low friction and high wear resistance.
- 5/8" thick top caps.
- Sheave axles feature hardened steel collars and snap rings.
- Pull out tire stops on both ends of the lift that allows drive through capability.
- Stainless steel lifting cables are rated to handle over 14,000 lbs. each.
- Cable keepers assures cables remain safely secure to the sheaves.
- Pre-assembled cables simplifies installation.
- 36" aluminum approach ramps are gusseted to eliminate flex and bending.
- Non-marring heavy-duty poly caster wheels will not damages painted floor surfaces.
- Durable powder coat finish.
- 3/4" runway bolts provide positive attachment with increased safety factor.
- Operator controls are simple to use, well-placed and ergonomically advanced to reduce operator strain and fatigue and increase safety.
- Electric/hydraulic power system.
- Single hydraulic cylinder underneath runway.
- Optional full-length aluminum platforms can be added to easily store lawnmowers, ATVs, jet skis or motorcycles.
|
|
|
|
|
|
|