 |
 |
 |
|
Call for Pricing
HDSO-14p 14,000-lb. Capacity Open Front Car Lift
The HDSO-14p is a legendary 14,000-lb. capacity open-front lift. This is an open front-model that allows easy entry and exit from beneath a vehicle. It is available with optional drive-thru ramps, dip-trays and rolling jacks.
- •Lifting capacity: 14,000 lbs. / 6,350 kg
- •Front axle max capacity: 7,000 lbs. / 3,175 kg
- •Rear axle min capacity: 7,000 lbs. / 3,175 kg
- •Overall front width: 143" / 3,632 mm
- •Overall rear width: 130” / 3,301 mm
- •Outside length: 215-1/2" / 5,473 mm
- •Overall length: 244" / 6,198 mm
- •Height of front columns: 97" / 2,464 mm
- •Height of rear columns: 95” / 2,413 mm
- •Runway min height: 7-5/8" / 192 mm
- •Max rise: 70" / 1,778 mm
- •Max lifting height: 77-5/8" / 1,970 mm
- •Width between front columns: 123" / 3,124 mm
- •Width between rear columns: 120” / 508 mm
- •Runway width: 20" / 508 mm
- •Width between runways: 45" / 1,143 mm
- •Length of runways: 199" / 5,054 mm
- •Min wheelbase @ rated capacity: 140” / 3,556 mm
- •Min wheelbase @ 75% capacity: 120” / 3,048 mm
- •Min wheelbase @ 50% capacity: 100” / 2,540 mm
- •Min wheelbase @ 25% capacity: 80” / 2,032 mm
- •Locking positions: 13
- •Lock spacing: every 4" / 102 mm
- •Lifting time: 60 sec
- •Motor: 220 VAC / 60 Hz / 1 Ph
- Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- •14,000-lb. lifting capacity
- •Huge cable sheaves reduce wear and tear
- •Extremely convenient open-front design for easy access
- •Extended runway length for servicing
- •Longer approach ramps for low ground clearance vehicles
- •Electric / hydraulic power system
- •Runways include rail-kit for optional accessories
- •Runways adjust for different tread widths
- •Automatic leveling system with multiple auto-leveling locking positions
- •Single hydraulic cylinder mounted underneath runway
- •Fully enclosed lifting cables, safety locks, and sheaves
- •Internal anti-sway slider blocks in each column
- •Pneumatic push-button safety release
- •Features heavy-duty 1/2" aircraft cable
- •Safety locks enclosed in columns minimize pinch points
- •Oversized sheave diameter reduces cable fatigue
- •Runways feature non-skid surface
- •Rugged, self-lubricating cable sheaves
- •Features 1-3/8” sheave axles
- •Multi-position safety locks in each column
- •Independent backup slack-cable safety latches
- •Includes fully adjustable lock stops for precise leveling
- •Integrated rolling bridge airline kit option available
- •Roll-back kit options available
- •Optional drive-thru ramps available
- •Optional drip trays available
- •Optional 7,000-lb. capacity rolling jacks available (Model RJ-7)
|
|
|
|
|
|
|